Cut Card
Pipefitting calculator
Know the cut before the torch comes out.
Cut Card gives pipefitters, pipe welders and steamfitters the number they actually cut. Enter the center-to-center and it takes off both fitting takeouts and the root gap at each weld, then rounds the answer to a mark you can make with soapstone. The working stays on screen, so you can check every step before you cut.
-
Illustration · example numbers, not to scale The cut, not just the math
Center-to-center minus both takeouts, minus the root gap per weld, rounded to a mark you can make. Every takeout and gap stays on the card, so a wrong number gets caught on the screen, not on the pipe.
Also planned
- Check backwardsEnter a cut you measured or already made and see the center-to-center it gives, before the torch comes out
- Offsets solvedSimple and rolling offsets, and travel, run and set at the standard fitting angles, with the formula shown
- A tape that never forgetsEvery solve is kept, so you can star a line or bring it back with a tap
- A cut list for the foremanSend the job's cut list as plain text, with a diameter-inch total
- A weld log that clones the last jointOne button repeats the last weld and bumps the number, and it warns before a process's continuity lapses
- Built for gloves and basementsBig tiles, no signal needed, and it reopens exactly where you left it
See all products
Available now